paxton

Drawersides

No results found.

Save time and money with 100% premade drawersides. These precisely made drawersides have 30% more ply’s than domestically produced drawersides. This produces a drawerside with virtually void free construction, excellent machinability and dimensional stability. Drawersides are made for extended life and to endure heavy loads.
Prefinished drawersides are coated on both sides with low VOC UV clear coat. This tough topcoat resists scratching and saves material and labor costs associated with in-house finishing. The unfinished drawersides are fine sanded ready to receive your preferred finish or stain.

  • Available upon request
  • Prefinished or unfinished
  • Lengths 5’ and 8’ or precision trim available
  • Thicknesses: 9, 12, 15, 18mm
  • Dado can be ordered to custom spec.
  • Widths: From 2” to 12″ widths
  • Pattern tolerance: +0.3mm,
  • Grades: B/BB, BB/BB, BB/CP
  • Certification: CARB 2

Drawersides: Technical Specifications

All RELY-A-PLY® Drawersides is produced under the GOST Standards 3916.1-96.

Specialized construction, dimensions and tolerances are available to meet your specific needs. Just ask one of our sales associates for more information.

Standard Thickness (mm) Number of Plies Thickness Tolerance GOST Std. (mm) Moisture content Sheets per Crate
3 3 +0.3/-0.4 5-10% 130
4 3 +0.3/-0.5 5-10% 100
6 5 +0.4/-0.5 5-10% 65
9 7 +0.4/-0.5 5-10% 50
12 9 +0.5/-0.5 5-10% 33
15 11 +0.6/-0.5 5-10% 26
18 13 +0.7/-0.5 5-10% 22
21 15 +0.8/-0.5 5-10% 19
24 17 +0.9/-0.5 5-10% 16
27 19 +1.0/-1.2 5-10% 14
30 21 +1.1/-1.3 5-10% 14
Overview

Save time and money with 100% premade drawersides. These precisely made drawersides have 30% more ply’s than domestically produced drawersides. This produces a drawerside with virtually void free construction, excellent machinability and dimensional stability. Drawersides are made for extended life and to endure heavy loads.
Prefinished drawersides are coated on both sides with low VOC UV clear coat. This tough topcoat resists scratching and saves material and labor costs associated with in-house finishing. The unfinished drawersides are fine sanded ready to receive your preferred finish or stain.

  • Available upon request
  • Prefinished or unfinished
  • Lengths 5’ and 8’ or precision trim available
  • Thicknesses: 9, 12, 15, 18mm
  • Dado can be ordered to custom spec.
  • Widths: From 2” to 12″ widths
  • Pattern tolerance: +0.3mm,
  • Grades: B/BB, BB/BB, BB/CP
  • Certification: CARB 2
Technical Specs & Sales Literature

Drawersides: Technical Specifications

All RELY-A-PLY® Drawersides is produced under the GOST Standards 3916.1-96.

Specialized construction, dimensions and tolerances are available to meet your specific needs. Just ask one of our sales associates for more information.

Standard Thickness (mm) Number of Plies Thickness Tolerance GOST Std. (mm) Moisture content Sheets per Crate
3 3 +0.3/-0.4 5-10% 130
4 3 +0.3/-0.5 5-10% 100
6 5 +0.4/-0.5 5-10% 65
9 7 +0.4/-0.5 5-10% 50
12 9 +0.5/-0.5 5-10% 33
15 11 +0.6/-0.5 5-10% 26
18 13 +0.7/-0.5 5-10% 22
21 15 +0.8/-0.5 5-10% 19
24 17 +0.9/-0.5 5-10% 16
27 19 +1.0/-1.2 5-10% 14
30 21 +1.1/-1.3 5-10% 14
Facebooklinkedin